NEC UNIVERGE DT700, User Manual

Page: 83 / 382

. . . . .
B A S I C S E T T I N G S / C O N F I G U R A T I O N
Basic Setup with the Menus and Cursor Pad
DT700 Phone User Guide
4-65
3
Select
1
Ringtone.
Figure 4.12 Ringtone menu
4
Select
1
Internal Ringtone.
Figure 4.13 Internal Ringtone
By default, your current internal ringtone is selected.
Use the

and

keys to scroll through the list of ringtones.
To listen to the ringtone, scroll to that selection. A single loop sample of the ringtone is
played.
Note:
The DT700 only plays the ringtone if it is in the idle state. If the DT700
receives an incoming call or event related to a soft ring, when it is playing this
ringtone, it stops playing the ringtone and plays the ringtone currently
configured for the received event.
To stop playing a ringtone and listen to another ringtone, use the

and

keys to
scroll to another ringtone.
To select a new ringtone, scroll to the ringotne or press the number for that ringtone,
then press the OK soft key or the ENTER key
b
. If you select a new ringtone, this
ringtone will be applied to your next incoming call.
To exit the menu without making any changes to your current ringtone, press the
Cancel soft key.
Note:
If a ringtone label shows a “*” character at the end of the file name, the file is
specified in your phone configuration file, but the file itself could not be
downloaded from the boot server. If you select this entry, it will not be saved
and your ringtone settings will not change.
Figure 4.14 Unavailable Internal Ringtone selection