NEC UNIVERGE DT700, User Manual

Page: 297 / 382

. . . . .
C A L L H I S T O R Y, A N D T H E C O R P O R A T E A N D P E R S O N A L D I R E C T O R I E S
The Personal Directory
DT700 Phone User Guide
11-279
• To enter special characters, press the
1
key.
For a list of special characters, see “Speed Dial and Personal Directory
Character Sets” in the
DT700 Phone User Guide
.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
4
Use the telephone keypad to enter a phone number for the entry and press Enter
b
on
the cursor pad or the OK softkey.
Figure 11.62 Enter Telephone Number
Up to 24 characters may be entered for the number. Only digits, “*” and “#” may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
5
6
Use the telephone keypad to enter a Speed Dial number (if desired) for the entry and
press Enter
b
on the cursor pad or the OK softkey.
Note:
For more information on Speed Dial Keys, see “Speed Dial and Programmable
Keys” on page 8-124.
Speed Dial entries can be internal or external numbers.
Figure 11.63 Select Speed Dial Number
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see “Speed Dial Key Numbering” on page 8-128.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
7
If you have assigned a Speed Dial to the entry, you can select the monitor settings for
this entry and press Enter
b
on the cursor pad or the OK softkey.
Note:
Monitoring can only be done on other lines that are internal to your system.
You cannot monitor external or outside lines.