NEC UNIVERGE DT700, User Manual

Page: 221 / 382

. . . . .
D T 7 0 0 M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Using Enhanced Programmable Keys
DT700 Phone User Guide
9-203
Figure 9.32 Transfer Key
• If the user has a call on hold, you will see a screen that gives you the option to
Pickup the call on that user’s line.
Figure 9.33 Pickup soft Key
To pick up a ringing call to a member of your workgroup
If you are set up for a workgroup, you will see a flashing red LED when there is a
ringing call on any other workgroup member’s phone.
•
While your phone is idle and the other workgroup member’s phone is ringing, do one of
the following:
• To place a hands-free or headset call : Press the key for the workgroup
member, then use your headset or the phone’s speaker to continue the call on
your phone.
• To use your phone handset for the call : Pick up your phone handset, then
press the key for the workgroup member to pick up the call.
Non-idle call states
• If you are on a call and want to pick up the ringing call for the workgroup member,
press the key for the workgroup member to automatically put your current call on
hold and pick up the ringing call.
• If you are on a call and want to pick up the ringing call for the workgroup member,
place your current call on hold and then press the key for the workgroup member
to pick up the ringing call.
To transfer a call to a member of your workgroup
1
While on a call, press the key for the workgroup member you want to transfer the call to.
2
Press the Blind soft key to Blind transfer your call.
Figure 9.34 Transfer soft key