NEC SV8300, Command Manual

Page: 520 / 804

3-464
NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE TITLE:
LOCATION DATA ASSIGNMENT
67
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
21
22
23
24
Programmable list
4
Programmable list
5
Programmable list
6
Programmable list
7 00 FAX Protocol Pat-
tern No. 00
01
02
03
06
NONE
Not detected the FAX
protocol
NOTE
G.711 µ-law
G.711 A-law
G.726
T.38 UDPTL
[8300R3]
As per Fixed list of
CM67 Y
= 20
CM67 Y=20
NOTE 1: To avoid the false detection, set the second data to 00 when the locations
(between locations) do not provide FAX over IP feature.
NOTE 2: When using SIP trunk, set FAX Protocol Pattern by CMBA Y=119.
01 FAX Payload Size
Pattern No. 01
04
NONE
10 ms.
40 ms.
(10 ms. increments)
As per Fixed list of
CM67 Y
= 20
CM67 Y=20
NOTE: When using SIP trunk, set FAX Payload size by CMBA Y=120.
08 Minimum value of
jitter buffer 01
30
NONE
10 ms.
300 ms.
(10 ms. increments)
120 ms.
CM67 Y=21/22/
23/24>09
NOTE 1: When setting CM67 YY=21/22/23/24>08 to other than default, set CM67
YY=21/22/23/24>09 to other than default.
NOTE 2: Assign the value which does not exceed the maximum value of jitter buffer set
by CM67 Y=21/22/23/24>09.
NOTE 3:
This data is not available when using T.38 UDPTL.
NOTE 4: Jitter buffer of PZ-64IPLC-A/PZ-128IPLC-A (VoIPDB) is controlled as 200
ms., when minimum value of jitter buffer is set more than 210 ms.
Continued on next page
~ ~
~ ~
JANUARY/31/2012
CM67