NEC SV8300, Command Manual

Page: 353 / 804

3-297
NWA-033623-001 Rev.8.1
91ch3003.fm
COMMAND CODE TITLE:
TRUNK ROUTE DATA
35
: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
044 Trunk access code sent to
SMDR for outgoing call/
Trunk Access Code for
Trunk-Direct Appearance
Multiline Operation 0 00
or
9 99
NONE
When a trunk is seized by a Trunk
Appearance key or LCR, one or two-digit code
(00-99) is sent out to the SMDR.
No data CM35 Y=189
NOTE: When both CM35 Y=044 and CM35 Y=189 are set to the same trunk route, the setting of CM35 Y=189
is effective.
046 DP/DTMF sender release
timing 0
1
2
3
4
5
6
7 2 seconds
4 seconds
6 seconds
8 seconds
12 seconds
14 seconds
16 seconds
10 seconds
048 Sending Busy/Idle informa-
tion to network
[North America Only]
0
1 Not available
Available
Backward signal when
address is completed on DID
[8300R3.5]
0
1
Set up speech condition without waiting FW
GII
Waiting FW GII
NOTE:
For Brazil, this data must be set to 1.
049 SMDR for incoming call 0
1 To provide
Not provided CM13 Y=05
051 Restriction of outgoing con-
nection
(Unrestricted) (RCA) 0
1 Restricted
Allow CM12 Y=01
CM35 Y=097
052 Restriction of outgoing con-
nection
(Non-Restricted-1) (RCB) 0
1 Restricted
Allow
053 Restriction of outgoing con-
nection
(Non-Restricted-2) (RCC) 0
1 Restricted
Allow
Continued on next page
~ ~
JUNE/15/2011
CM35