NEC SV8300, Command Manual

Page: 428 / 804

3-372
NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA
42
: Default
KIND OF SYSTEM COUNTER/PAD DATA SETTING DATA REMARKS
181 Maximum number of Wake Up Call setting at
the same time 01
32
NONE
1 call
32 calls
No limit
CM08>850
NOTE: Assign the maximum number of Wake Up Call for the same time per every minute.
182 Time for monitoring long call duration of
trunk call 01
60
NONE
1 hour
60 hours
60 hours
CM35 Y=286
CMEA
Y=2>04A
NOTE:
When the call time exceeds the time set by this command, a fault information is stored as long-time
call fault.
183 Maximum number of simultaneous calling of
each blade for SLT
[8300R2]
01
16
NONE
1 call
16 calls
4 calls
185 Date to total the call charge
[For EU]
01
25
NONE
The 1st of the month
The 25th of the month
End of month
NOTE: From the 26th to the day before end of month cannot be assigned.
186 Room Status Code set by Check In operation 01
08
NONE
Room Status Code 1
Room Status Code 8
Not used
187 Room Status Code set by Check Out operation
188 Room Status Code when pressing Call
Recording Function Button
190 Setting of PAD data for a Station-to-Station
call 01
15
16
17
31
NONE
-15 dB/-15 dB
(1 dB increment)
-1 dB/-1 dB
0 dB/0 dB
+1 dB/+1 dB
(1 dB increment)
+15 dB/+15 dB
-6 dB/-6 dB
+: Gain
- : Loss
Continued on next page
~ ~
~ ~
~ ~
~ ~
~ ~
~
~
~ ~
~ ~
JUNE/15/2011
CM42