NEC SV8300, Command Manual

Page: 524 / 804

3-468
NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE TITLE:
LOCATION DATA ASSIGNMENT
67
Y=90-92
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
90 Limit bandwidth
between locations XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
00000
65534
NONE
CCC
0 Kbps
65534 Kbps
100000 Kbps (100 Mbps)
Clear
CM12 Y=39/50
CM8A
Y=5000-5255:
173
CM67 Y=92
CMAD Y=29
NOTE 1: Assign the value which exceeds the warning bandwidth set by CM67 Y=92.
NOTE 2: Set the bandwidth for voice packet. The available bandwidth minus the bandwidth for control packet
(40 Kbps) is the bandwidth for voice packet.
If the reflection speed of terminals such as button reflection becomes slower by setting the value above
mentioned above, set the bandwidth for voice packet to value which the bandwidth for control packet
supposed more than 40 Kbps.
91 Action when the
traffic between
locations exceeds
the limit bandwidth XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
0
3
Restrict the connection
between location groups
Keep the connection
between location groups CM12 Y=39/50
CM67 Y=90
CM8A Y=5000-
5255: 173
CMAD Y=29
92 Warning band-
width between
locations XX ZZ XX: Location
number
(00-63)
ZZ : Location
number
(00-63)
00000
65534
NONE
CCC
0 Kbps
65534 Kbps
100000 Kbps (100 Mbps)
Clear
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM67 Y=90
CMAD Y=29
NOTE:
Assign the value which does not exceed the limit bandwidth set by CM67 Y=90.
~ ~
~ ~
JULY/18/2008
CM67