NEC SV8300, Command Manual

Page: 667 / 804

3-611
NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE TITLE:
SIP PROFILE DATA
BA
FUNCTION:
This command is used to assign the various profile data for SIP Trunk.
PRECAUTION:
(1) Profile No. for control packet is assigned by CMA7 Y=71.
(2) When entering data with characters, the following characters can be registered;
Alphabet upper case (A-Z), alphabet lower case (a-z), numeric (0-9), symbol (! “ # $ % & ’ ( ) + ,
; < = > ? @ [ ] ^ _ ‘ { } ~), Space, hyphen (-), period (.), slash (/), colon (:)
NOTE: The character “CCC” cannot be registered.
ASSIGNMENT PROCEDURE:
DATA TABLE:
Y=04-47
ST EXE
+ + + +
BAYY/YYY
2ND DATA
DE
(Profile No. 00-31) (1-32 digits)
+ + DE
1ST DATA
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
04 TOS/Diffserv Prece-
dence for SIP trunk
control packet
TOS: Type of Service 00
31
Profile number
for control packet 00
07
15
PRECEDENCE 0
PRECEDENCE 7
PRECEDENCE 0
CM35 Y=134
CMA7 Y=71
CMBA Y=10
NOTE 1: The higher number has higher priority.
NOTE 2: This data is recommended to set to “5”. Consult with network manager when this data is changed.
NOTE 3: Set CMBA Y=10 to provide Diffserv QoS.
Continued on next page
RESET
~ ~ ~
APRIL/16/2010
CMBA