NEC SuperScript 610plus, User Manual

Page: 123 / 293

Selecting Paper and Media 6–7
Heavy (thick) printed stock can generate misfeeds
and paper jams, in addition to causing excessive
wear to the print mechanism.
Bond paper exceeding 22 lbs. (82 g/m
2
) must be
placed in and fed from the hopper one sheet at a
time (do not place several sheets in the hopper).
In order to minimize curling, heavy bond paper
must be ejected from the face-down door.
Don’t use paper heavier than 28 lbs (105 g/m
2
).
The acceptable range of media weight for use is
16 to 28 pounds (60 to 105 g/m
2
).
Heavy Print
Stock
Envelopes
Envelopes should be ejected from the face-down
door in order to minimize curling and wrinkling.
The printer accepts one of four standard envelope
sizes:
Monarch 3.375 in.
×
7.5 in. (98.4 mm
×
190.5 mm)
Commercial 10 4.125 in.
×
9.5 in. (105 mm
×
241 mm)
DL 110 mm
×
220 mm (4.33 in.
×
8.66 in.)
C5 162 mm
×
229 mm (6.38 in.
×
9.02 in.)
NEC tested Eaton 25% Cotton (20 lb, diagonal
seamed and obtained satisfactory results.
NOTE: NEC neither warrants nor recommends the
use of any particular envelope and the user assumes
all responsibility as to the quality and performance of
the envelopes selected.