NEC SuperScript 1800, User Manual

Page: 78 / 131

72 SuperScript 1800 — User’s Guide
P
RINTING
T
RANSPARENCIES
1. Create the information you need printed on the
transparencies within your application. Try printing on a
plain sheet of paper first for proper placement.
2. Specify Transparency in the printer driver (A) or on the
Operator Panel (the Operator Panel can only show a
selection for tranparencies if Tray 1 or Tray 1-M is already
selected as your paper source).
3. Load up to 30 sheets in the Multipurpose Tray
(Tray 1) (B).
note:
You can only print transparencies from the
Multipurpose Tray.
4. Adjust the MP Paper Guide to the transparencies.
For Best Results
• Use transparencies in letter or A4 size only.
• Transparencies must be able to withstand temperatures
of 392°F (200°C) for at least 0.1 second.
• Keep the paper path clean. Transparencies are especially
sensitive to dirt. If shadows appear on either the top or
bottom of the sheets, refer to Chapter 7, “Maintaining
Your Printer,” for instructions on how to clean the
printer.
• Do not fan transparencies. The generated static electricity
may cause transparencies to stick together and result in a
paper jam.
• The best quality printing will be inside a 10 mm border
around the edge of the transparency.
10mm
Best Print Area
Do not fan transparencies!
MP Paper Guide
A