manualshive.com logo in svg

NEC SuperScript 1800, User Manual

Share
Download
NEC SuperScript 1800 User Manual Download Page 34

28

SuperScript 1800 — User’s Guide

The SuperScript 1800 Status Monitor

The SuperScript 1800 Status Monitor is an option that can be 
installed during or after the installation of any driver for 
computers running the Windows 95 and 98 operating 
systems. It communicates with the printer to determine the 
state of the connection, print job, and whether paper must be 
added. The Status Monitor cannot be used to monitor 
printers connected to a network.

For information about installing the SuperScript 1800 Status 
Monitor, see Chapter 3, “Installing the Software.”

Opening the Status Monitor

The Status Monitor can be opened at any time.

To open the Status Monitor From the Windows Start button:
1.

Click the Windows Start  button.

2.

Point to Programs  then NEC SuperScript 1800 .

3.

Click Status Monitor  and the Status Monitor will appear.

The figures shown below display each tab in the
SuperScript 1800 Status Monitor window.

While the Status Monitor is running, its icon can be seen in 
the status area of the Windows Task Bar.

If the Status Monitor is hidden behind a window, click the 
icon and the monitor will appear.

Status Monitor icon

Preferences Tab

About Tab

SuperScript 1800 Status Monitor for Windows 95 and 98

Current State Tab

Summary of Contents for SuperScript 1800




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands