NEC SuperScript 1800, User Manual

Page: 127 / 131

121
APPENDIX D
STATUS MONITOR
MESSAGES
Computers running Windows 95 or 98 can use the
SuperScript 1800 Status Monitor for monitoring the
operational state of the printer. The table in this appendix
explains each message that can appear in the Status Monitor.
The Status Monitor cannot be used to monitor printers
connected through a network, serial, or infrared connection.
The first column of the table lists all the images that can be
displayed by the Status Monitor. The second column lists the
message that appears at the bottom of the Status Monitor
window for that image. The third column describes what
needs to be done to solve the problem.
For information about installing the Status Monitor, see
Chapter 3, “Installing the Software.” For information about
using the Status Monitor, see Chapter 4, “Printer Software.”
Displayed
Image Status
Message
Corrective Action
Ready None
Offline Press the Go/Continue
button on the printer.
Printing None
Power Save Mode None
Hardware Error There is a problem with
the printer’s electronics.
Have a qualified technician
inspect the printer.
Cover Open
or Install Cartridge Assure the Top Cover is
completely closed or insert
toner cartridge.
Toner Low The Toner Cartridge is
near empty. Be prepared to
replace Toner Cartridge.
Toner Empty Replace Toner Cartridge.
Printing Error Visually inspect the printer
for anything unusual and/
or resend the print job.
Serial Error Assure the serial printer
cable is connected
securely.
Paper Jam Open any trays or covers
to visually inspect for
jammed paper. Remove
jammed paper.
Tray 2 Empty Fill Tray 2 (standard 500-
sheet Cassette) with paper.
Displayed
Image Status
Message
Corrective Action