NEC SuperScript 1800, User Manual

Page: 66 / 131

60 SuperScript 1800 Series — User’s Guide
I/O MENU
This menu is only available when the Serial/LocalTalk Card
is installed in your printer.
DP-L-MGN 4.0
0 ~ 9.9 mm
This setting lets you select the
left margin of the print
material when the DUPLEX
menu item is set to LONG.
The margin can be changed in
increments of 0.1 millimeters.
L-BIND 0
0 ~ 2.2 cm
This setting lets you select the
left margin for binding when
long edge duplexing.
The margin can be changed in
increments of 0.1 centimeters.
S-BIND 0
0 ~ 2.2 cm
This setting lets you select the
left margin for binding when
short edge duplexing.
The margin can be changed in
increments of 0.1 centimeters.
Item Value Explanation
Item
Value Explanation
BAUDRATE 300
600
1200
2400
4800
9600
19200
38400
57600
115200
This menu item is used to
select the printer’s baud
rate (speed at which
information is transferred)
for communicating from
the computer to the
printer.
ROBU.XON ON
OFF
This menu item is used to
select the method for
generating XONs.
When it is set to ON, the
printer sends an XON
when sufficient buffer
space is available. If the
host does not receive data
within approximately one
second, the printer will
transmit additional XONs
at one second intervals
until the host receives
data.
When it is set to OFF, the
printer sends one XON
when it can accept more
data or when it is online.
The printer does not send
XONs every second while
the printer is online and
ready for more data.