manualshive.com logo in svg

NEC SuperScript 1800, User Manual

Share
Download
NEC SuperScript 1800 User Manual Download Page 45

Windows NT 4.0 Operating Systems

39

PRINTER SOFTWARE

W

INDOWS

 NT 4.0 O

PERATING

 S

YSTEMS

NEC SuperScript 1800 PS Default Document
Properties Window

The PS Default Document Properties window contains two tabs 
that divide the driver properties into two categories.

•

Page Setup

•

Advanced

Driver properties in the PS Default Document Properties 
window can only be adjusted from inside a software 
application and only affects a document opened by the same 
application.

Figures shown below display each tab in the 
NEC SuperScript 1800 PS Default Document Properties 
window.

P

AGE

 S

ETUP

 P

ROPERTIES

Use printer properties for setting the paper size and source, 
the number of copies, and printing orientation.

A

DVANCED

 P

ROPERTIES

Advanced properties provide the same options as Page 
Setup, but with some additional options.

NEC SuperScript 1800 PS Default Document Properties Window for Windows NT 4.0

Click the 

Help

 button to start the help system. From the upper right 

hand corner, click 

?

 then click on a setting for more information. Click 

Restore Defaults

 to return the option values to their default.

Page Setup Tab

Advanced Tab

Summary of Contents for SuperScript 1800




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands