3-10 Disassembly and Reassembly
Front Panel Removal
Remove the front panel before installing a device in one of the 5 1/4-inch
accessible device bays. The front panel does not need to be removed if you are
installing a 3 1/2-inch hard drive. If you are going to install a 5 1/4-inch device,
you also need to remove the blank panel that covers the bay on the front panel,
and the metal bay cover that covers the accessible device bay.
Remove the front panel as follows:
1.
Six metal tabs hold the front panel to the front of the system unit. Remove
the front panel by evenly pulling it away from the system unit to release the
tabs.
Removing the Front Panel
A - Front Panel
2.
Identify the accessible device bay where the device will be installed.
3.
Press the tabs on the back side of the blank plastic panel together slightly
and pull the panel free from the metal bay cover (see the figure on the
following page). Set the panel aside.
Summary of Contents for POWERMATE PROFESSIONAL 9000E - SERVICE
