![background image](http://html.mh-extra.com/html/nec/powermate-professional-9000e-service/powermate-professional-9000e-service_service-manual_248711078.webp)
3-16 Disassembly and Reassembly
5.
Lift the drive cage up slightly to free the large hooked tabs from the slots in
the chassis.
6.
Pull the drive cage away from the chassis.
DIMM Removal
Remove a DIMM module from the system board as follows.
If your memory configuration requires the removal of a module, perform the
following steps:
!
CAUTION
Before opening the computer and before handling boards or
memory modules, reduce static discharge by touching the
system's metal chassis.
1.
Remove the system unit cover (see “Removing the Side Covers”).
2.
Locate the system memory upgrade sockets on the system board (see the
figure “Processor and DIMM Sockets on the System Board” in Section 4).
Any socket (or all) can contain a DIMM memory module.
3.
Label and disconnect any cables that block the DIMM sockets.
4.
Press the plastic clips at the outer edges of the socket away from the memory
module. This ejects the DIMM from the socket.
Removing a DIMM
A - Plastic Clip
Summary of Contents for POWERMATE PROFESSIONAL 9000E - SERVICE
