![background image](http://html.mh-extra.com/html/nec/powermate-professional-9000e-service/powermate-professional-9000e-service_service-manual_248711090.webp)
3-28 Disassembly and Reassembly
Removing the Battery
A – Battery B – Battery Socket
!
WARNING
The battery can explode if it is incorrectly replaced or
improperly discarded. Use only the same battery or an
equivalent type recommended by the manufacturer when
replacing the battery.
Lithium acts as a catalyst when exposed to water and
causes spontaneous combustion on contact. Discard used
batteries according to the manufacturer’s instructions.
6.
Reconnect any cables that were disconnected to reach to battery.
7.
Replace the system unit cover and front panel as previously described.
8.
Connect external peripherals and power cables.
9.
Run Setup to reconfigure system parameters (see Section 2, “System
Configuration”).
Summary of Contents for POWERMATE PROFESSIONAL 9000E - SERVICE
