![background image](http://html.mh-extra.com/html/nec/powermate-professional-9000e-service/powermate-professional-9000e-service_service-manual_248711087.webp)
Disassembly and Reassembly 3-25
System Fan Removal
Remove the system fan by following these steps.
1.
Power off the system and remove the left side cover as described earlier in
this section.
2.
Remove the drive cage as described earlier in this section.
3.
Label and disconnect the fan cable connected to the system board.
4.
Remove the four screws that secure the fan to the rear of the chassis.
Locating System Fan Screws
A – System Fan Screws
5.
Remove the fan from the system.
Speaker Removal
Remove the internal speaker by following these steps.
1.
Power off the system and remove the left side cover as described earlier in
this section.
2.
The speaker is supported by three tabs and is located at the front of the
chassis (see the figure on the following page).
Summary of Contents for POWERMATE PROFESSIONAL 9000E - SERVICE
