5-4 Expansion Boards
Modem In Connector
The pin assignments for modem in connector are as follows.
Modem In Connector Pin Assignments
Pin
Signal
1
Logic ground
2
Modem MIC out
3
Logic ground
4
Modem speaker in
Graphics Board
The following sections provide pin assignments for the VGA connectors and the
video in and out connectors on the graphics boards.
AccelSTAR II Connectors
The following sections provide the pin assignments for the AccelSTAR II VGA
connector, the video in and the video out.
AccelSTAR II VGA Interface Connector
Video signals are output from the PCI video board through a VGA interface
connector, which is a 15-pin, D-subconnector located on an expansion board
bracket the rear of the system unit. The following table lists the pin assignments.
AccelSTAR II VGA Interface Connector Pin Assignments
Pin
Signal
Pin
Signal
Pin
Signal
1
Red
6
Signal ground
11
Not connected
2
Green
7
Signal ground
12
Not connected
3
Blue
8
Signal ground
13
H Sync (TTL)
4
Not connected
9
Not connected
14
V Sync (TTL)
5
Signal ground
10
Signal ground
15
Not connected
Summary of Contents for POWERMATE PROFESSIONAL 9000E - SERVICE
