NEC PlasmaSync PX-42VM1G, Service Manual

Page: 31 / 172

15
Watching computer images with a
wide screen
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1. Press the "WIDE" button on the remote controller.
2. Within 3 seconds ...
Press the "WIDE" button again.
The screen size switches as follows:
→
NORMAL
→
FULL

NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer im-
age.
FULL size screen
The image is expanded in the horizontal direction.
When using a graphic accelerator board that is capable of
displaying 848
2
480.
FULL size screen
Information
m
Supported resolution
• See page 44 for details on the display output of the
various VESA signal standards supported by the
monitor.
• When 852 dot
2
480 line wide VGA (*) signals with
a vertical frequency of 60 Hz and horizontal frequency
of 31.72 kHz are input, select "WIDE" for the "RGB
SELECT" setting. Since selecting an 848
2
480 signal
automatically displays the image in correct size, it is
not necessary to change the RGB SELECT setting.
* "IBM PC/AT" and "VGA" are registered trademarks
of IBM, Inc. of the United States.