NEC PlasmaSync PX-42VM1G, Service Manual

Page: 48 / 172

32
Setting a computer image to the correct RGB se-
lect screen
On the computer image select the RGB mode, moving im-
age (video) mode, wide mode or digital broadcast.
Example: Setting the RGB SELECT mode to “VIDEO”
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the
▲
and
▼
buttons to select “OPTION”, then
press the “PROCEED” button.
The “OPTION” screen appears.
2. Use the
▲
and
▼
buttons to select “RGB SELECT”.
Information
m
RGB SELECT modes
One of these 4 modes must be selected in order to display
the following signals correctly.
RGB .........
VESA 640
2
480@60Hz (Use this mode
for normal computer images.)
VIDEO ......
To display the video signal that is converted
to the RGB signal, set this mode.
WIDE ........
When an 852 dot
2
480 line signal with a
vertical frequency of 31.72 KHz is input,
the image may be compressed horizontally.
To prevent this, set RGB SELECT to
WIDE.
DTV ..........
Set this model when watching digital broad
casting (480P).
m
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.
3. To set the RGB select mode to “VIDEO” ...
Use the
§
and
©
buttons to select “VIDEO”.
The mode switches as follows each time the
§
or
©
button is pressed:
→
RGB
↔
VIDEO
↔
WIDE
↔
DTV
←
4. Once the setting is completed ...
Press the “EXIT” button to return to the main menu.
To delete the main menu, press the “EXIT” button once
more.
O P T I O N
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
RGB3 ADJ.
RGB1
VIDEO1
HD/DVD1
RGB
RGB
1080B
1
:
:
:
:
:
:
:
SEL. ADJ. RETURN EXIT
O P T I O N
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
RGB3 ADJ.
RGB1
VIDEO1
HD/DVD1
RGB
VIDEO
1080 B
1
:
:
:
:
:
:
:
SEL. ADJ. RETURN EXIT