NEC NEFAX 805, Operation Manual

Page: 85 / 231

Basic FAX Operation (2)
4. Basic FAX Operation (2)
4.1. Transmitting a Document Using Memory (Memory TX)
Memory TX lets the machine scan the contents of the document to be transmitted at high
speed into its built-in memory and transmit it to the other party. (The procedure in which
you directly transmit the document without using memory is called “Direct
Transmission”)
JAN. 04 02:30 100%
-SET DOC. FACE UP-
1. Check that the message display is shown
Fax screen.
If not, press the Copy/Fax key to switch.
2. Press the Memory TX key.
Memory TX
Press the key
The Memory TX indicator lights up, indicating that the
Memory TX function is selected, otherwise the Direct
Transmission is selected.
This function is used to set the TX mode of the machine, two options are available:
Choices Available Description
Memory TX When set in this mode, documents are
scanned into memory for transmission and
dialing starts after the first page is scanned
(Quick TX).
ADF TX (Direct Transmission) When set in this mode, documents are
scanned for transmission after connection
has been made to the receiving unit. (When
the available memory is insufficient, please
select ADF TX for a successful
transmission)
If the line is not available, the message
“LINE IS BUSY” will shown, and the
machine attempts to redial again later.
Memory TX
Memory TX
NOTE:
•
In Memory Transmission Mode, you can retrieve your original
document sooner than you can do in ADF TX (Direct Transmission)
Mode.
3. Make the necessary settings other than Memory TX, load the document, and then dial
the other party.
4-1