CHAPTER 1 GENERAL INFORMATION
Equipment Name and Function
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0
Page 27
PN-4LLCB
LLC
4-line Analog Long Line Circuit Card for Single Line
Telephones
Provides Caller ID Display on analog station.
Line resistance : Maximum 2500
Ω
(including internal
resistance of the distant office equipment)
Provides Message Waiting Lamp control, momentary open/
reverse functions for each circuit.
PZ-PW122 is required.
PN-M03
M03
V.35 Data Terminal Equipment Interface Card
Used with the PN-2DPCB card to provide the V.35 interface.
PN-M10
M10
Optical Fiber Interface Card
Provides optical fiber interface for T1/E1 Digital Trunk
Interface (1.5 M/2 Mbps) or Remote PIM.
Line length: 10 km (6.2 miles) or less
Line coding: CMI
PN-2ODTA
ODT
2-line Out Band Dialling Trunk Card
Used as either a 2-wire E&M trunk or a 4-wire E&M trunk.
Equipped with –48V DC-DC on-board power supply.
Both No. 0 and No. 1 circuits must be set to the same purpose
(2-wire or 4-wire) in one card.
PN-2ODTB
[For
New Zealand/
UK]
ODT
2-line Out Band Dialling Trunk Card
Used as either a 2-wire E&M trunk or a 4-wire E&M trunk.
Equipped with –48V DC-DC on-board power supply.
Both No. 0 and No. 1 circuits must be set to the same purpose
(2-wire or 4-wire) in one card.
PN-4RSTF
[For North
America]
SDT
4-line Sender Card for Caller ID Display on analog Single Line
Telephones
PN-4LLCB is required.
PN-8RSTA/
PN-8RSTG
PBR
8-line PB Receiver Card
Used for a PB station line, DID or tie line.
PN-TNTA
TNT
2-line Tone/Music Source Interface Card
Used for BGM or Music on Hold.
Provides two jacks for an external tone/music source.
Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
