CHAPTER 1 GENERAL INFORMATION
Equipment Name and Function
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 3.0
Page 25
PN-2DPCB
DPC
2-line Data Port Controller Card
Used for the intra-office or inter-office digital data transmission
on nailed down connection.
Accommodates maximum two DTEs with V.11 (X.21) interface
or V.24/V.28 (S-10) interface.
PN-2ILCA
ILC
2-line ISDN Line Circuit Card
Provides a physical interface to ISDN Terminals.
Occupies eight time slots per one card.
PN-32IPLA
IPELC
32-line IP Line Circuit Card for D
term
IP
Two cards can be accommodated per FP, maximum eight per
system.
10 BASE-T/100 BASE-TX twisted pair cable is connected
directly to this card.
PN-4LCC
[For Others]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Maximum 600
Ω
(including telephone set)
Provides Line Test function.
PN-4LCD-A
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Maximum 600
Ω
(including telephone set)
Provides momentary open and Message Waiting Lamp
control, Line Test functions for each circuit.
Equipped with +80V DC-DC on-board power supply.
PN-4LCE
[For
Australia]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Maximum 600
Ω
(including telephone set)
Provides Line Test function.
PN-4LCF
[For
Australia]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Maximum 600
Ω
(including telephone set)
Provides Message Waiting Lamp control, Line Test functions
for each circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
PN-4LCK
[For China]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Maximum 600
Ω
(including telephone set)
Provides Line Test function.
Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
