NEC N8100-1447F User Manual Download Page 117

Page: 117 / 332

Installing the Operating System with Express Setup 5-3

Microsoft Windows Server 2003

This section explains how to install Microsoft® Windows® Server 2003 by using the Express
Setup.

IMPORTANT:

Be sure to prepare Windows Server 2003 CD-ROM

that includes Service Pack 1.

NOTES:

Express Setup does not support the installation of Windows Server
x64 Editions. If you want to install it, see Appendix D.

If you install Windows Server 2003 without using Express Setup,
see Appendix E.

Notes on Windows Installation

This section explains the notes on the Windows installation.

Confirm these notes before starting the Express Setup.

About the Windows family

This computer supports the following Windows editions:

Microsoft® Windows® Server 2003 Standard Edition (hereinafter, referred to as
"Windows Server 2003")

Microsoft® Windows® Server 2003 R2 Standard Edition (hereinafter, referred to as
"Windows Server 2003")

NOTE:

Express Setup does not support the installation of Windows

Server 2003 x64 Editions. If you want to install it, see Appendix D.

On installing other OS, contact sales dealer or the maintenance service representative.

BIOS Settings

Confirm the BIOS settings described in Chapter 4 before installing Windows Server 2003.

Summary of Contents for N8100-1447F













































































































































































































































































































































Search results

Summary of Contents for N8100-1447F

Reviews:

Related manuals for N8100-1447F

Brands by name

Popular brands

NEC N8100-1447F, User Manual

Search results

Summary of Contents for N8100-1447F

Reviews:

Related manuals for N8100-1447F

Brands by name

Popular brands