NEC N8100-1447F, User Manual

Page: 233 / 332

Upgrading Your Server 9-23
PCI Board
The server is equipped with five slots for installing PCI boards.
IMPORTANT:
„
Any PCI board is easily affected by static electricity. Make sure to
wear the wrist strap (an arm belt or anti-static glove), and discharge
static electricity from your body before handling the PCI board. Do
not make bare hands contact with terminals and components on the
PCI board. In addition, do not put the PCI board on a non-anti-static
desk directly. See "Static Precautions" in this chapter for details of
the static electricity.
„
The long-sized board (full-length board) can be installed only to the
PCI slots #3 or #4. Care must be taken to avoid damage to the
components on the mother board when installing the long-sized
board.
Mother board
PCI slot #1 (PCI Express)
PCI slot #2 (PCI Express)
PCI slot #3 (32-bit/33 MHz)
PCI slot #4 (32-bit/33 MHz)