NEC N8100-1447F, User Manual

Page: 311 / 332

Installing Windows Server 2003 E-9
8.
Select the proper SCSI Adapter and press Enter .
– [LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When N8103-117 board is installed.)
– [LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When N8103-116 board is installed.)
– [LSI Embedded MegaRAID (Windows XP/2003)]
(When LSI Embedded MegaRAID

is used.)
9.
If you utilize N8103-75/107, select the [Adaptec Ultra320 SCSI Card (Windows 32-bit)]
and press
Enter .
IMPORTANT:
If you utilize N8103-75/107, press S to proceed when
the message below is shown.
The driver you provided seems to be newer than the Windows
default driver.
Windows already has a driver that you can use for "Adaptec
Ultra320 SCSI Card (Windows 32-bit)".
Unless the device manufacturer prefers that you use the driver
on the floppy disk, you should use the driver in Windows.
10.
If you utilize N8103-95, select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and
press
Enter .
IMPORTANT:
If you utilize N8103-95, press S to proceed when the
message below is shown.
The driver you provided seems to be newer than the Windows
default driver.
Windows already has a driver that you can use for "Adaptec
Ultra160 SCSI Cards (Win Server 2003)".
Unless the device manufacturer prefers that you use the driver
on the floppy disk, you should use the driver in Windows.
Continue performing tasks according to the subsequent messages that appear.