NEC N8100-1447F User Manual Download Page 4

Page: 4 / 332

SYMBOLS USED IN THIS MANUAL AND WARNING LABELS

Attentions

Indicates that improper use may cause an electric shock.

Indicates that improper use may cause personal injury.

Indicates that improper use may cause fingers to be caught.

Indicates that improper use may cause fumes or fire.

Indicates a general notice or warning that cannot be specifically identified.

Indicates that improper use may cause loss of eyesight due to laser beam.

Prohibited Actions

Indicates a general prohibited action that cannot be specifically identified.

Do not disassemble, repair, or modify the server. Otherwise, an electric shock or fire
may be caused.

Mandatory Action

Unplug the power cord of the server. Otherwise, an electric shock or fire may be
caused.

Indicates a mandatory action that cannot be specifically identified. Make sure to follow
the instruction.

Summary of Contents for N8100-1447F













































































































































































































































































































































Search results

Summary of Contents for N8100-1447F

Reviews:

Related manuals for N8100-1447F

Brands by name

Popular brands

NEC N8100-1447F, User Manual

Search results

Summary of Contents for N8100-1447F

Reviews:

Related manuals for N8100-1447F

Brands by name

Popular brands