NEC N8100-1447F, User Manual

Page: 87 / 332

Configuring Your Server 4-27
1.
When BIOS detects a bootable device, it displays the information on the device in the
relevant indication.
To boot the server from a desired device, the device must be registered as a boot device.
(Up to eight boot devices can be registered.)
2.
Pressing X after selecting a device allows the selected device to be registered as a boot
device or deleted from the registration.
With eight boot devices being registered, any other device cannot be registered as a boot
device even if you press
X
. To register a device as a boot device newly, first delete the
registration of a device registered as a boot device but not booted any more.
Pressing Shift + 1 after selecting a device allows the selected device to be made
enabled/disabled.
3.
You can change the boot priority (first to eighth) of each device by using ↑ , ↓ , + and/or – .
To change the priority of a device, move the cursor to the device by using the ↑ or ↓ , and
press + or – .
IMPORTANT:
To boot NEC EXPRESSBUILDER, set the priority of
the devices as shown in the figure above.