NEC N8100-1429F, User Manual

Page: 88 / 352

4-4 Configuring Your Server
Configuration Examples
The following describes examples of configuration required to use software-link features or for
system operations.
Time and Date Settings
Select [Main] - [System Time].
Select [Main] - [System Date].
UPS
To link power supply with the UPS
„
To power on the server when power is supply from the UPS
Select [Server] - [AC LINK] - [Power On].
„
To keep the server off-powered even when power is supplied from the UPS, when the
POWER switch is used to turn off the server.
Select [Server] - [AC LINK] - [Last State].
„
To keep the server off-powered even when power is supplied from the UPS
Select [Server] - [AC LINK] - [Stay Off].
Boot
To change the boot order of devices connected to the server
Select [Boot] and specify the boot order.
To display POST check results
Select [Advanced] - [Boot-time Diagnostic Screen] - [Enabled].
You can also press Esc while the NEC log is on the screen to display POST check results.
To use the remote wakeup feature
Select [Advanced] - [Advanced Chipset Control] - [Wake on Ring] - [Enabled].
Select [Advanced] - [Advanced Chipset Control] - [Wake on RTC Alarm] - [Enabled].
To control from the HW console
Select [Server] - [Console Redirection] and set each item.