NEC N8100-1429F, User Manual

Page: 316 / 352

D-22 Installing Windows Server 2003 x64 Editions
3.
Select the adapters to include in team.
4.
Select "Adapter Fault Tolerance" or "Adaptive Load Balancing" and click [Next].
5.
Click [Finish].
6.
If necessary to set the adapter priority setting, refer the following step. If not, go through
to step 7.
1. Click [Settings] tab on [TEAM:xxx #yy Properties].
2. Click [Modify Team].
3. Point to the adapter [Intel(R)PRO/1000....]and click [Set Primary] or [Set Secondary].
4. Click [OK].
5. The setup will go back to [EAM:xxx #yy Properties] and the priority setting will
display in list ().
6. Click [OK]
7.
The setup will go back to [Intel (R) PROSet for Wired Connections]dialog box, so click
[OK].
8.
Restart the system.
Graphics Accelerator Driver
If you utilize standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
Please follow the following procedure when you want to reinstall the driver individually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "setup.exe" in the following directory.
\005\win\winnt\w2k3amd\video\setup.exe
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart the
system.