NEC N8100-1429F, User Manual

Page: 130 / 352

4-46 Configuring Your Server
Others
„
Clear Configuration
Clears configuration information. Select "Configure"
→
"Clear Configuration" from the
TOP menu. Executing "Clear Configuration" clears all configuration information on the
RAID Controller and hard disk drives. The configuration information on all channels of
the RAID Controller is also cleared.
NOTES:
„
When configuration information on the RAID Controller and that on
the hard disk drive do not match (excluding at replacement of faulty
RAID Controller), configuration mail fail if you select the
configuration information on the RAID Controller. In this case,
execute "Clear Configuration" to create configuration again.
„
LSI Software RAID Configuration Utility cannot delete each virtual
drive. Use Universal RAID Utility instead.
„
Force Online
Puts a hard disk drive being in the FAIL status online.
Select "Objects"
→
"Physical Drive"
→
(select hard disk drive)
→
"Force Online" from
the TOP menu.
„
Rebuild Rate
Sets the Rebuild Rate.
Select "Objects"
→
"Adapter"
→
"Sel. Adapter"
→
"Rebuild Rate" from the TOP menu.
Available value is between 0% and 100%. Default value (recommended) is 30%.
„
Hard disk drive information
Checks hard disk drive information.
Select "Objects"
→
"Physical Drive"
→
(select hard disk drive)
→
"Drive Properties"
from the TOP menu.