NEC N8100-1429F, User Manual

Page: 141 / 352

Installing the Operating System with Express Setup 5-5
Supported Mass Storage Controllers
The NEC EXPRESSBUILDER DVD attached to your system supports the following mass storage
controllers for installation.
NOTE: If you want to install the other boards by using a driver floppy
disk ("OEM-FD for Mass storage device"), except ones listed below,
see "Installing with the OEM-FD for Mass storage device" and
"Installing Optional Mass Storage Driver" of "Parameter File Creator"
in Chapter 6.
„
Controllers supporting installation of OS with Express Setup
– N8103-116 RAID controller (128 MB, RAID0/1)*
– N8103-117 RAID controller (128 MB, RAID0/1/5/6)*
– N8103-118 RAID controller (256 MB, RAID0/1/5/6)*
– Onboard RAID controller (LSI Embedded MegaRAID)
„
Other controllers
– N8103-75 SCSI Controller*
– N8103-95 SCSI Controller*
– N8103-104 SAS Controller*
– N8103-107 SCSI Controller*
* Option.
NOTES:
„
The driver of option card mentioned above is stored in the
EXPRESSBUILDER DVD.
„
If you use the board not mentioned above, the ExpressSetup will
fail. Refer to the instructions attached to the board.