NEC N8100-1429F, User Manual

Page: 330 / 352

E-10 Installing Windows Server 2003
7.
Select the [Intel(R) ICH9 SATA AHCI Controller (Desktop/Server/Workstation)] and
press
Enter .
Now the Setup goes back to Step 5.
– If the RAID controller is connected, press S to go on Step 8.
– If the RAID controller is not connected, press
S
to go on Step 9.
8.
Select the proper SCSI Adapter and press Enter .
– [LSI Logic MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)]
(When N8103-116/117/118 RAID controller is used.)
– [LSI Embedded MegaRAID (Windows XP/2003)]
(When LSI Embedded MegaRAID is used.)
9.
If you utilize N8103-75/107, press S .
A list of mass storage devices is displayed.
Select the [Adaptec Ultra320 SCSI Cards (Windows 32-bit)] and press
Enter
.
IMPORTANT:
The following messages may be displayed when using
N8103-75/107. Press S to proceed.
The driver you provided seems to be newer than the Windows
default driver.
Windows already has a driver that you can use for
"Adaptec Ultra 320 SCSI Cards (Windows 32-bit)"
Unless the device manufacturer prefer that you use the driver
on the floppy disk, you should use the driver in Windows.
10.
If you utilize N8103-95, press S .
A list of mass storage devices is displayed.
Select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and press Enter .
IMPORTANT:
The following messages may be displayed when using
N8103-95. Press S to proceed.
The driver you provided seems to be newer than the Windows
default driver.
Windows already has a driver that you can use for
"Adaptec Ultra 160 SCSI Cards (Win Server 2003)"
Unless the device manufacturer prefer that you use the driver
on the floppy disk, you should use the driver in Windows.