75
SETTING
Projection Type Selection
This feature allows you to set the installation type according to the
projection configuration.
NOTE:
• You do not need to change the setting for XG-852C and XG-1352C.
These models are pre-adjusted at the factory for "FLOOR/FRONT".
1
Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 68 for the explanation of the PASSCODE.
2
Use the CURSOR
or
button to highlight the “8/OPTION”
line. Press ENTER to display the “OPTION” menu. You can also
select the “OPTION” menu directly by pressing the INPUT “8”
button.
3
Use the CURSOR
or
button to highlight the “1/SETTING
MODE” line. Press ENTER to display the “SETTING MODE”
menu. You can also select the “SETTING MODE” menu directly
by pressing the INPUT “1” button.
4
Use the CURSOR
or
button to select the “PJ ORIENTA-
TION” item, then press ENTER to display the “PJ ORIENTA-
TION” menu.
NOTE: The SETTING MODE has three menus. The “PJ ORIEN-
TATION” item is on the first menu (P01). To access P02 or P03
from P01, press and hold down the CTL button then press
the
button; to return to P01 from P02 or P03, press and hold
down the CTL button then press the
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
P01/P03
OPTION
– SETTING MODE –
CONNECT CONDITION
CEILING
FRONT
DEFAULT INPUT SELECT
FOCUS EDGE MODE
ALL
S-VIDEO MODE SELECT
S2
AUTO
STANDALONE
LAST
PJ ORIENTATION
VIDEO MODE SELECT
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
