27
– – – – – – – –
N A M E I N P U T
SIGNAL ENTRY
2) Input the source name by selecting one character at a time
with the INPUT buttons 1 through 10 and by moving the
cursor with the CURSOR
button. After finishing the
selection of the characters, press ENTER.
• Up to eight characters can be selected.
• Eight characters are assigned to one INPUT button.
• Whenever the INPUT button is pressed, characters will be
rotated.
For example:
A
→
B
→
C
→
1
→
A .....
• When pressing the INPUT button while holding down the CTL
button, another group of characters will be rotated.
For example:
a
→
b
→
c
→
!
→
a .....
• The characters corresponding to these INPUT buttons are as
follows:
When using With CTL
INPUT 1
A, B, C, and 1
a, b, c, and !
INPUT 2
D, E, F, and 2
d, e, f, and “
INPUT 3
G, H, I, and 3
g, h, i, and #
INPUT 4
J, K, L, and 4
j, k, l, and $
INPUT 5
M, N, O, and 5
m, n, o, and %
INPUT 6
P, Q, R, and 6
p, q, r, and &
INPUT 7
S, T, U, and 7
s, t, u, and ‘
INPUT 8
V, W, X, and 8
v, w, x, and (
INPUT 9
Y, Z, ?, and 9
y, z, /, and )
INPUT 10
*, ,, ., and 0
;, :, +, and -
• If you have made an error in the input of a character, use the
CURSOR
button and enter the correct letter or number.
To delete one character, move the CURSOR
button to the
character to be deleted and then press the NORMAL button.
To delete all the entered name, hold down the CTL button then
press NORMAL.
• The “INITIAL DATA SELECT” menu will be displayed.
