NEC Express5800/120Ri-2, User Manual

Page: 89 / 349

Setting Up Your Server 3-21
After a few seconds your system begins the internal Power-On Self Test (POST). POST
automatically checks the system board, CPU module, memory, keyboard, and most
installed peripheral devices.
IMPORTANT:
Always allow POST to complete before powering down your
system.
The server management logic on your system board monitors and
logs system voltage changes. When powering down your system
you may experience a 30-second delay from the time you press the
push-button power on/off switch on the front panel and your system
powering down. This is normal system operation and is required by
the server management logic.
If you have problems powering on your system, see Chapter 8.
After you have successfully powered on your system, insert the NEC EXPRESSBUILDER
CD-ROM into the DVD-ROM drive, reboot the system and follow the screen prompts to run NEC
EXPRESSBUILDER.