NEC Express5800/120Ri-2, User Manual

Page: 50 / 349

2-16 General Description
STANDARD FEATURES
High performance Expandability
Intel  Xeon  Processor
High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Serial Attached SCSI)
High-speed memory access (DDR2-533
or DDR2-667)
Two PCI EXPRESS (x8) connectors
Two PCI EXPRESS (x4) connectors
Two PCI-X (64-bit/66MHz) connectors
Large memory of up to 48GB
Six hot-swap SAS hard disk drive bays
Up to two multi-processors are available
for upgrade.
One backup file bay
USB2.0 interface (A USB-support driver
is required.)
High-reliability Many Available Features
El Torito Bootable CD-ROM (no
emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-Link feature
Consoleless feature
Self-diagnosis
Remote Management Controller
Memory monitoring feature (error
correction/error detection)
CPU/memory degradation feature
(logical isolation of a failed device)
Memory chipkill feature
Memory mirroring/online spare memory
feature
Bus parity error detection
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
Redundant power supply (hot-swap)
RoMB (RAID on mother board)
Auto-rebuild feature (hot-swappable)
BIOS password feature
Mechanical security lock
Redundant fans
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Management Utilities Easy and Fine Setup
NEC ESMPRO
NEC DianaScope
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
NEC EXPRESSBUILDER (system setup
utility)
Configuration Parameter Diskette Creator
SETUP (BIOS configuration utility)
Software RAID Setup Utility (Onboard
RAID configuration utility)