NEC Express5800/120Re, User Manual

Page: 43 / 346

General Description 2-9
Mother Board
1 Main power connector
2 Lithium battery
3 CMOS clear jumper switch
4 Hard disk drive access lamp pin header
(Connect the LED relay cable of an additional SCSI/RAID controller.)
5 Remote management card socket
6 SCSI 2 connector
(for SCSI hard disk drives) *1
7 SCSI 1 connector (not used in this system)
*1
*1 SCSI hot-plug hard disk model only
8 Password clear jumper switch
9 Connectors for external device
10 PCI riser card slot
(For full-height boards. 133 MHz/64-bit, 3.3V, PCI-X)
11 PCI riser slot
(For only low-profile boards. 66MHz/64-bit, 3.3V, PCI-X)
12 DIMM sockets (for the interleave type)
(The sockets are called #1, #2, #3, #4, #5, and #6 sequentially from top.)
13 Processor sockets
13 -1 Processor #1 (CPU #1) 13 -2 Processor #2 (CPU #2)
14 Redundant fan jumper switch
15 SATA connector
1
2 3 4 5 6 7 8
10 11 12
FRONT
13 -1
14
REAR
13 -2
9
15