NEC Express5800/120Re, User Manual

Page: 110 / 346

4-12 Configuring Your Server
Security
The Security menu appears if you move the cursor to the position of "Security."
Press
Enter
on "Set Supervisor Password" or "Set User Password," to display the following screen.
Enter the passwords on the dialog box. Passwords may have up to eight characters including
alphanumerics and symbols.
IMPORTANT:
„
User password can be set only when Administrator password is
already set.
„
Set the passwords only after OS is installed.
See the table below for the items.
Option Parameter Description Your Setting
User Password Is Clear
Set Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by clearing
password jumper on system board
(see Configuring Mother Board
Jumpers in this Chapter).
Supervisor
Password Is Clear
Set Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by clearing
password jumper on system board
(see Configuring Mother Board
Jumpers in this Chapter).
Set User
Password Up to eight
alphanumerics Supervisor password controls access
to the setup utility.
When Enter is pressed, the user is
prompted for a password; press
Esc
to abort. Once set, this can be
disabled by setting it to a null string, or
by clearing password jumper on
system board (refer to Configuring
Mother Board Jumpers in this
chapter).