NEC Express5800/120Re, User Manual

Page: 171 / 346

Installing the Operating System with Express Setup 5-35
Graphics Accelerator Driver
Install Graphics Accelerator Driver mounted in standard.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K\SETUP.EXE.
* Install the graphics accelerator driver in the following directory if you communicate
your server with the remote KVM console. (Optional advanced remote management
card (N8115-02) must be installed in your server to use the remote KVM console.)
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K\SETUP.EXE
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue. If the dialog message "Direct X Ver.8 isn't installed." appears, select [continue]
to continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
USB 2.0 Driver
USB 2.0 Driver is pre-installed.
When restoring the system or re-installing the system, the driver is automatically installed in the
process of updating the system.