NEC Express5800/120Re, User Manual

Page: 152 / 346

5-16 Installing the Operating System with Express Setup
Installing SCSI Controller Driver
If you utilize SCSI controller driver (N8103-65F/75F), install it according to the following
procedure:
1.
Start [Device Manager] from [Start] menu
→
[Control Panel]
→
[Administrative Tools]
→
[Computer Management].
2.
Double click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
[INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75F board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Graphics Accelerator Driver
Update Graphics Accelerator Driver mounted in standard.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer]
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\VIDEO\RADEON7000\W2K3\SETUP.EXE
* Install the graphics accelerator driver in the following directory if you communicate
your server with the remote KVM console. (Optional advanced remote management
card (N8115-02) must be installed in your server to use the remote KVM console.)
<CD-ROM Drive Letter>:\N8115-02\VIDEO\RADEON7000\SETUP.EXE
4.
Follow the message to continue the installation.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.