NEC e232 User Manual Download Page 79

Page: 79 / 88

Currency converter

Currency converter function allows you to convert an amount of money in one currency to another.

Activating the Currency converter

☛

With the standby screen displayed, press

and

. The Currency

screen will be displayed.

Converting currency

☛

Use the

▼

key to highlight the source currency code.

☛

Press

and

to bring up the currency list. Then, use the

▲

and

▼

keys to highlight the required currency and press .

You can change the source currency by using the and keys to scroll through the currency codes, too.

☛

Use the

▼

key to highlight the destination currency code.

☛

Press

and

to bring up the currency list. Then, use the

▲

and

▼

keys to highlight the required currency and press .

You can change the destination currency by using the and keys to scroll through the currency codes, too.

☛

Use the

▼

key to highlight the exchange rate.

☛

Key in the required exchange rate (for decimal point, press

☛

Use the

▼

key to highlight the money field.

☛

Key in the amount of money you wish to convert (for decimal point, press

) and press

Softkey 1

The result will be shown in the result field, and the current settings will be stored.

If you have made a mistake in entering the amount, use

CLR

to delete individual number or press

Softkey 2

to clear the entire amount, then start

again.

Resetting the currencies

☛

With the source currency code or the destination currency code field highlighted, press

and

to reset all the currencies to their initial values.

▼

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands