NEC e232 User Manual Download Page 61

Page: 61 / 88

Broadcast messages

These messages (e.g. weather reports, news) are sent by the network to all phones in a certain area.

Broadcast messages service is network dependent. Please contact your service provider for details.

☛

With the standby screen displayed, press

Softkey 1

and

to read the Broadcast messages.

Broadcast settings

☛

With the Message screen displayed, press

and

to display the CB settings screen before performing the following procedures.

Display filter

You can select the Filter setting for the Cell broadcast messages.

☛

With the CB settings screen displayed, press

to display the CB enable screen.

☛

Press

to receive none, press

to receive all the broadcast message, press

to specify a list or CBMI(Cell Broadcast Message Identifier) to

receive broadcast from.

Languages

☛

With the CB settings screen displayed, press

to display the CB languages screen.

☛

Press the appropriate key for the required language.

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands