NEC e232 User Manual Download Page 50

Page: 50 / 88

Message menu

☛

With the standby screen displayed, press

Softkey 1

to display the Message screen.

You can also access the Message screen by pressing

and

from the standby screen.

☛

Press the appropriate key for the required option.

If there are no messages in the message list, the item is displayed in gray and you cannot select it.

Depending on the operator, the menu number and available option may vary.

No.

Message menu

Inbox

The received messages are saved.

Drafts

The messages currently being edited are saved.

Outbox

The failed sent messages are saved.

Sent

The sent messages are saved.

Recycled

The deleted messages are saved.

Message stored in the SIM card will not be saved in the Recycled folder but deleted permanently

when deleted.

6, 7

Folder1/Folder2

The messages you have moved with the Move msg (see “Message list Options menu” on page 41)

are saved.

The received broadcast messages are saved. Refer to “Broadcast messages” on page 49 for details.

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands