NEC e232 User Manual Download Page 67

Page: 67 / 88

Web settings

To set up your phone to access WAP information on the internet, use the following procedures.

Web/MMS Profiles

Your handset has been preset with a list of GPRS and CSD WAP proxy of different service provider.
To display the list of available connections, you can use the following procedure.

☛

With the standby screen displayed, press

and

to display the Web/MMS profiles list screen.

☛

Use the

▲

and

▼

keys to highlight the required connection name, then press to select.

You can also choose which type of connection you require: CSD or GPRS. Please contact your service provider before setting.

The connection with a

✔

next to its name will be the connection used when you make a WAP connection to your Home page on the internet.

If the list of Profiles is too long to fit into one page, you can display the remaining Profiles by switching between pages using the

Side

keys.

Setting the Web/MMS Profiles

To alter or enter information into a connection, use the following procedure.

☛

With the standby screen displayed, press

and

to display the Web/MMS profiles list screen.

☛

Use the

▲

▼

key to highlight a connection name, press

to display the Profile options screen.

Adding a new Profile

☛

With the Profile options screen displayed, press

☛

Key in the Proxy title, then press .

☛

Press the appropriate key for the required option.

No.

Profiles setting menu

Load preset

Chooses proxy.

Proxy title

Edits proxy’s name.

Homepage

Edits URL of proxy’s homepage.

Security

Turns Web/MMS security setting on or off.

IP address

Edits IP address. If you do not have an IP address, please contact your network provider.

Bearer type

Web:

Enables to select the type of connection for Web: GPRS or CSD.

MMS:

Enables to select the type of connection for MMS: GPRS or CSD.

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands