NEC e232 User Manual Download Page 76

Page: 76 / 88

Depending on the conditions, some options may be displayed in gray and not be available.

ToDo list

This feature allows you to set up to 100 ToDo tasks that should be finished by a certain date. You can choose to display either all ToDo tasks, or those

just finished or unfinished. Each task is identified by a description (of up to 32 characters) and its start/due date.

☛

With the standby screen displayed, press

and

to display the ToDo list screen before performing the following procedures.

Creating ToDo task

☛

If there are no ToDo tasks listed, press

Softkey 1

. The ToDo editing screen will be displayed showing the Start date, Due date, Status, and

Description.

If there are no ToDo tasks stored, you will be prompted to create one.

Setting the Start date

☛

With the ToDo editing screen displayed, use the

▲

and

▼

keys to highlight the Start date field and press

Softkey 2

☛

Key in the required date, month and year. Then, press

Softkey 1

No.

Scheduler Options menu

Add new

Adds a new entry.

Edit

Edits the highlighted event.

Copy

Copies the highlighted event.

Delete

Deletes event(s).

Current selection:

Deletes the highlighted event.

Public:

Deletes the Public events on the day, all the past Public events, or all the Public

events.

Private:

Deletes the Private events on the day, all the past Private events, or all the

Private events.

All:

Deletes all the events.

Weekly/Monthly

Selects the Weekly/Monthly screen.

Go to date

Displays the selected date.

View

Enables to select the View type for displaying the events.

Events:

Displays the Public events only, the Private events only, or all the events.

Summary:

Displays the summary of all the events.

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands