NEC e232 User Manual Download Page 68

Page: 68 / 88

When you have finished entering or editing the connection information, press

Softkey 2

. The connection list will be displayed.

If you select the read-only proxy, Edit function is disabled.

Copying a Profile

You can create a new Profile by copying a stored Profile.

☛

With the Profile options screen displayed, press

☛

Edit the displayed Proxy title, then press .
For the Profile settings screen, see “Adding a new Profile” on page 55.

Editing a Profile

You can edit various settings for stored Profiles.

☛

With the Profile options screen displayed, press

to display the Profile settings screen.

For the Profile settings screen, see “Adding a new Profile” on page 55.

Deleting a Profile

To delete a stored Profile, use the following procedure.

☛

With the Profile options screen displayed, press

to delete the highlighted profile.

☛

Press

Softkey 1

to confirm the deletion.

GPRS settings

AP name:

Enables to enter the address of the external data network you want to connect to, either an IP

address or a text string.

User name:

Enables to enter your user ID to enable you to log on to the external data network.

Password:

Enables to enter your password to enable you to log on to the external data network.

CSD settings

Connect type:

Enables to select the connection line type: ISDN or Modem.

Dial-up number:

Enables to enter the phone number to dial to make a connection to your WAP service

provider.

User name:

Enables to enter your user ID to enable you to log on to the external data network.

Password:

Enables to enter your password to enable you to log on to the external data network.

MMS centre

Enables to edit the MMS centre address.

No.

Profiles setting menu (Continued)

Summary of Contents for e232

























































































Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands

NEC e232, User Manual

Search results

Summary of Contents for e232

Reviews:

Related manuals for e232

Brands by name

Popular brands