NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 61 / 184

UNIVERGE SV8100 Issue 5.0
General Description Manual 2 - 19

Press a Trunk Group Routing (dial 9) Key

Dial a code for a specific trunk (
#
9 + the trunk number)

Dial a code for a Trunk Group (704 + group number)

Dial a code for Trunk Group Routing or ARS (9)

Dial an Alternate Trunk Route Access Code (which you must define)

Press or Use a Speed Dial bin
There are 200 available trunks.
Class of Service
Class of Service (COS) sets various features and dialing options (called items) for
extensions. The system allows any number of extensions to share the same Class of
Service. An extension can have a different Class of Service for each Night Service
mode. This lets you program a different set of dialing options for daytime operation,
nighttime operation and even during lunch breaks. An extension Class of Service can
be changed in system programming or via a Service Code (normally 677). There are
15 available Classes of Service.
Clock/Calendar Display
The system uses Clock/Calendar Display for:
Using the Daylight Savings Setup program, you can determine whether the system
should automatically adjust the system time for daylight savings time/standard time
changes.
Clock Adjustment
The system can be programmed to automatically adjust the system clock nightly.
This feature allows you to make adjustments should the system cabinet regularly lose
or gain time.

Central Office Calls
(Access Maps)

Station Message Detail
Recording

Class of Service (Class)

System Reports

Direct Inward Lines

Toll Restriction (Class)

Display Telephones

Trunk Group Routing

Night Service (Automatic)

Voice Mail

Programmable Trunk
Parameters

Voice Response System

Ring Groups