NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 78 / 184

Issue 5.0 UNIVERGE SV8100
2 - 36 Features
Handsfree Answerback/Forced Intercom Ringing
Handsfree Answerback permits an extension user to respond to a voice-announced
Intercom call by speaking toward the telephone, without lifting the handset. Like
Handsfree, this is a convenience for workers who do not have a free hand to pick up
the handset.
Busy Status Display
When a display multiline terminal user places an Intercom call to a busy extension,
the details of the busy status (who is talking to the extension or which line is in use by
the extension) can be displayed. The details of the trunk busy status (the extension
using the line) can be displayed after trying to access the trunk. This feature provides
a user information which can determine whether or not they should use Barge-In for
the extension or trunk. This information automatically displays for a multiline terminal
when programmed.
IP Multiline Station (SIP)
The UNIVERGE SV8100 system supports IP extensions using a variety of multiline
terminals. These telephones have the same look and functionality of typical multiline
telephones, but they are connected to the CCPU via IP rather than by a hardwired
connection to a DLC port.
The following DT700 IP Multiline Telephones (ITL) support IP extensions:

ITL-2E-1 (BK) TEL

ITL-6DE-1 (BK) TEL

ITL-8LD-1 (BK) TEL/ITL-8LD-1 (WH) TEL
Enhancements
The same user name and password can be assigned to IP Multiline Station,
MH240 and Desktop ports when automatic or manual registration is used (
Version
3000 or higher software ).
With Version 3000 or higher system software, the Registration Override feature is
enhanced to allow IP Multiline Stations (SIP) using 1st Party CTI application or
Multiline Stations (SIP) in a system using 3rd Party CTI applications (Desktop
Shared Services or UCB) to be overridden giving users access to their IP
telephone from any location. By utilizing the override login function, users have the
flexibility of logging into their IP Station in the office as well as remotely at the home
office.
NAPT (Network Address Port Translation) - With Version 3000 or higher system
software, DT700 series terminals can be installed at remote locations, however
Plug and Play is not supported. Some configuration in the remote router's is
required, and terminal firmware must be upgraded to
Version 3.0.0.0 .